Other Functions; Timer Warning Display; Checking Tape Position; Changing Display Information - JVC HR-S2912U Instructions Manual

Checking, canceling or changing program settings
A
Disengage timer
Press TIMER, then press POWER 1.
● When "AUTO TIMER" is set to "ON" (
have to press TIMER.
B
Access Program Check screen
Press PROG. CHECK.
C
Access Program screen
Press PROG. CHECK again. Each time you
press PROG. CHECK, the next program's
Program screen appears.
D
Cancel or change program setting
To cancel a program, press CANCEL when the Program screen
you do not want is shown.
To change a program, press the appropriate button: START
(Number key "1" and/or "4"), STOP
or "5"), DATE / (Number key "3" and/or "6"), CH
DAILY (M-F) (Number key "8"), WEEKLY (Number key "9") and/
or SP/EP when the Program screen on which you want to make
changes is shown.
E
Return to normal screen
Press PROG. CHECK repeatedly until no Program screen is
shown.
F
Reengage timer recording standby mode
Press TIMER. The VCR turns off automatically and "
displayed on the display panel.
● When "AUTO TIMER" is set to "ON" (
recording standby mode automatically resumes when you turn
off the VCR.
Program overlap warning display
If "PROGRAM NOT COMPLETED PROGRAM OVERLAP"
appears, you have another program overlapping the program you
have just made. The Program Check screen appears and
conflicting programs will start blinking.
PROGRAM NOT COMPLETED
PROGRAM OVERLAP
Example:
Program 1 (you have just made) and Program 4 overlap each other
A
Select program to modify
Press , then press OK or
rt
● You can only select one of the
overlapping programs.
● If you do not mind this overlap, press
PROG. to finish the timer program
setting. The program starting earlier or
program with the lower program number will be recorded.
B
Cancel or change program setting
To cancel a program, press CANCEL when
the Program screen you do not want is
shown.
To change a program, press the
appropriate button: START
key "1" and/or "4"), STOP
key "2" and/or "5"), DATE
CH / , DAILY (M-F) (Number key "8"), WEEKLY (Number key
"9") and/or SP/EP when the Program screen on which you want to
make changes is shown, then press OK or
● If the overlap is not yet solved, the conflicting programs will be
shown on the Program check screen. Repeat the above steps
again.
pg. 13), you do not
PR START STOP
1 8:00P 10:00
2 10:00A 10:45
3 11:30P 1:00 125
4
5
6
7
8
PRESS (CHECK) TO NEXT
/ (Number key "2" and/
" is
#
pg. 13), the timer
PR START STOP CH DATE
1 8:00P 10:00 12 12/24
2 10:00A 10:45 40 12/25
3 11:30P 1:00 125 12/25
4 9:00P 10:00 10 12/24
5
6
7
8
( , ) THEN ( ) (PROG.) : END
PR START STOP
1 8:00P 10:00
.
e
2 10:00A 10:45
3 11:30P 1:00 125
4 9:00P 10:00
5
6
7
8
( , ) THEN ( ) (PROG.) : END
PROGRAM 4
START
9:00PM
DATE
12/24/03
WED
PRESS (CANCEL) TO CANCEL
PRESS (OK) TO CONFIRM
/ (Number
PRESS (PROG.) TO END
/ (Number
/ (Number key "3" and/or "6"),
.
e

Other Functions

Timer warning display

A warning appears on the TV screen to tell
you that the timer-recording is to start in
5 minutes if you are not in the timer
CH DATE
12 12/24
recording standby mode at that time. Press
40 12/25
12/25
TIMER to put the VCR into timer recording
standby mode. To clear the display, press CANCEL on the Remote.

Checking tape position

When you change the VCR operation
mode from the stop mode to fast forward
or rewind mode, or when you perform an
Index Search or Instant Review, the tape
position indicator appears.
/
The position of "
shows you where you are on the tape.
/ ,
● Set "SUPERIMPOSE" to "ON" (

Changing display information

Each time you press DISPLAY, the display panel
shows the channel number and the clock time
alternatively.
● You can change display in the stop or recording
mode, or during rewind/fast-forward.
● When "SUPERIMPOSE" is set to "ON"
( pg. 13) and DISPLAY on the Remote is pressed, time
counter and tape remaining time will appear on the TV screen.
To reset the time counter, press C.RESET on the Remote.

Function settings

You can use the other useful function settings on the Function Set
screen.
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
A
Access Main Menu screen, then
Function Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to
"FUNCTION SET", then press OK or
B
Select Function
Press to move the highlight bar (arrow) to the function you
rt
want to set.
CH DATE
12 12/24
40 12/25
FUNCTION
12/25
S-VHS ET
10 12/24
VIDEO CALIBRATION
PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP EP TIMER
NEXT PAGE
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
C
Change setting
STOP
Press OK or
10:00PM
CH
MENU to return to normal screen.
10 SP
After a power failure occurs, some Function Settings will be
reset to its default setting.
— 12 —
" in relation to "B" (Beginning) or "E" (End)
q
pg. 13).
rt
e
PREVIOUS PAGE
VIDEO STABILIZER
OFF
ON BLUE BACK
AUTO 2ND AUDIO RECORD
OFF AUDIO MONITOR
S-VHS MODE
ON
OFF FRONT AUX INPUT
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
. The default setting is bold in the table below. Press
e
CONTINUED ON NEXT PAGE
–WARNING–
TIMER RECORDING
TO START SOON
(CANCEL)
+ + + E
B
REMAIN 1:00
COUNT 1:23:45
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
to
.
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
OFF
ON
OFF
HI-FI
ON
VIDEO