Other Functions; Checking Tape Position; Changing Display Information; Timer Warning Display - JVC HR-VP49U Instructions Manual

– Timer Recording –
B
Access Program Check screen
Press PROG. CHECK.
C
Access Program screen
Press PROG. CHECK again. Each time you
press PROG. CHECK, the next program's
Program screen appears.
D
Cancel or change program setting
To cancel a program, press CANCEL when the Program screen
you do not want is shown.
To change a program, press the appropriate button: START+/–,
STOP+/–, DATE+/–, CH+/–, and/or SP/EP when the Program
screen on which you want to make changes is shown.
E
Return to normal screen
Press PROG. CHECK repeatedly until no Program screen is
shown.
F
Reengage timer recording standby mode
Press TIMER. The VCR turns off automatically and "
displayed on the display panel.
When "AUTO TIMER" is set to "ON", the timer recording
standby mode automatically resumes when you turn off the
VCR.

Program overlap warning display

If "PROGRAM NOT COMPLETED PROGRAM OVERLAP"
appears, you have another program overlapping the program you
have just made. The Program Check screen appears and
conflicting programs will start blinking.
PROGRAM NOT COMPLETED
PROGRAM OVERLAP
Example:
Program 1 (you have just made) and Program 4 overlap each
other
A
Select program to modify
Press , then press .
rt e
You can only select one of the
overlapping programs.
If you do not mind this overlap, press
PROG. to finish the timer program
setting. The program starting earlier or
program with the lower program number will be recorded.
B
Cancel or change program setting
To cancel a program, press CANCEL when
the Program screen you do not want is
shown.
To change a program, press the
appropriate button: START+/–, STOP+/–,
DATE+/–, CH+/–, and/or SP/EP when the
Program screen on which you want to make changes is shown,
then press OK.
If the overlap is not yet solved, the conflicting programs will be
shown on the Program check screen. Repeat the above steps
again.
PR START STOP CH
1 8:00P 10:00 12
2 10:00A 10:45 40
3 11:30P 1:00 125
4
5
6
7
8
PRESS (CHECK) TO NEXT
PROGRAM 1
START STOP
8:00 PM 10:00 PM
DATE CH
12/24/00 12 SP
PRESS (CANCEL) TO CANCEL
PRESS (CHECK) TO NEXT
" is
#
PR START STOP CH DATE
1 8:00P 10:00 12 12/24
2 10:00A 10:45 40 12/25
3 11:30P 1:00 125 12/25
4 9:00P 10:00 10 12/24
5
6
7
8
( , ), THEN ( ) (PROG.) : END
PR START STOP CH
1 8:00P 10:00 12
2 10:00A 10:45 40
3 11:30P 1:00 125
4 9:00P 10:00 10
5
6
7
8
( , ), THEN ( ) (PROG.) : END
PROGRAM 4
START STOP
9:00PM 10:00PM
DATE CH
12/24/00 10 SP
SUN
PRESS (CANCEL) TO CANCEL
PRESS (OK) TO CONFIRM
PRESS (PROG.) TO END

Other Functions

DATE
12/24
12/25
12/25

Checking tape position

When you change the VCR operation
mode from the stop mode to fast forward
or rewind mode, or when you perform an
Index Search or Instant Review, the tape
position indicator appears.
The position of "
(Beginning) or "E" (End) shows you where
you are on the tape.
Set "SUPERIMPOSE" to "ON".

Changing display information

Each time you press DISPLAY, the display panel
shows the channel number and the clock time
alternatively.
You can change display in the stop, recording or
recording pause mode, or during rewind/fast-
forward high-speed search.
When "SUPERIMPOSE" is set to "ON" and DISPLAY on the
Remote is pressed, time counter will appear on the TV screen.
To reset the time counter, press C. RESET on the Remote.

Timer warning display

A warning appears on the TV screen to tell
you that the timer-recording is to start in
5 minutes if you are not in the timer
recording standby mode at that time. Press
TIMER to put the VCR into timer recording
standby mode. To clear the display, press
CANCEL on the Remote.
Function settings
You can use the other useful function settings on the Function Set
screen.
A
Access Main Menu screen, then
Function Set screen
Press MENU on the Remote. Press
DATE
12/24
move the highlight bar (arrow) to
12/25
12/25
"FUNCTION SET", then press OK or
12/24
B
Select Function
Press to move the highlight bar (arrow) to the function you
rt
want to set.
HR-VP59U
FUNCTION
AUTO PICTURE
PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP EP TIMER
VIDEO STABILIZER
NEXT PAGE
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
HR-VP49U
FUNCTION
AUTO PICTURE
PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP EP TIMER
VIDEO STABILIZER
BLUE BACK
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
B
" in relation to "B"
q
to
rt
.
e
PREVIOUS PAGE
ON BLUE BACK
2ND AUDIO RECORD
AUTO
AUDIO MONITOR
OFF
ON
OFF
OFF
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
ON
AUTO
OFF
ON
OFF
OFF
ON
+ + + E
–WARNING–
TIMER RECODING
TO START SOON
(CANCEL)
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
ON
OFF
HI-FI