Express Timer Programming; Howv - JVC HR-S9600EU Instructions Manual

30
EN
Express Timer
Programming
Before performing Express Timer Programming:
Make sure that the recorder's built-in clock is set
properly.
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the VIDEO channel (or AV mode).
1
2
1
4
7
1
PROG
2
START+/–
– –:– –
2 3
5 6
8 9
3
4
0
4
3
OK
TV PROG+/–
TIMER RECORDING (cont.)
If you don't know the S
HOW
wish to record, use the following procedure to set your recorder
to timer-record the programme.
ACCESS SHOWVIEW
SCREEN
1
Press PROG.
ACCESS PROGRAMME
SCREEN
2
Press START +/–. (If you're
just starting out, "P1"
appears.)
The front display panel looks like this:
ENTER PROGRAMME
START TIME
3
Press START +/– to enter
the time you want
recording to start.
Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
The front display panel looks like this:
ENTER PROGRAMME STOP
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move
1 minute at a time.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
V number for the programme you
IEW
– P1 –
START STOP
=
– –:– – – –:– –
SP VPS/PDC OFF
DATE TV PROG
– –.– –
[+/–] =
[PROG] : EXIT
SP
– P1 –
START STOP
=
21:00 – –:– –
SP VPS/PDC OFF
DATE TV PROG
– –.– –
[+/–] =
[PROG] : EXIT
SP
– –
– –