JVC HR-S9600EU Instructions Manual page 53

Basic Connections
This is an example of basic connection if you have both
satellite tuner and decoder.
Connect the decoder to your recorder's AV2 IN/DECODER
connector and AV1 IN/OUT connector to the satellite tuner's
connector. Then connect the satellite tuner and TV. If you have
a decoder for satellite broadcast, connect it to the satellite
tuner's connector.
Satellite Tuner Unit
DECODER
Decoder
S-VIDEO OUT
Back of Recorder
Mains outlet
Outdoor Unit
Satellite Cable
VCR TV
AV1 OUT
S OUT
COMP. Y/C
Decoder
NOTES:
To record a satellite programme which delivers the Y/C signal,
set "AV2 SELECT" to "AV2" and "AV1 SELECT" to "S-VIDEO".
You can obtain high-quality S-VHS picture.
If you connect your recorder and TV via S-Video cable VC-
S211 (not provided), you can enjoy high-quality S-VHS
pictures.
Set "AV2 SELECT" to "DECODER" to view a scrambled
broadcast. (
Automatic Satellite Program Recording function is not
possible with this connection.
To view a programme via the satellite tuner, select L-1 mode
by pressing NUMBER keys and/or TV PROG so that
"L-1" appears on the display panel.
For details, refer to the instruction manual for the satellite
tuner and decoder.
Aerial
TV Aerial
cable
ANT. IN
RF OUT
21-pin AV input
connector (SCART)
SYNCHRO EDIT
JLIP
ANT. IN
AV1 IN/OUT
L
AUDIO
OUT
R
AV2 IN/DECODER
PAUSE/R.A. EDIT
RF OUT
pg. 44)
Aerial
connector
Back of TV
EXT.1
53
EN
S-VIDEO IN
connector