JVC HR-S9600EU Instructions Manual page 43

A
TV Receiver Player
21-pin SCART Cable
(not provided)
VIDEO
CHAN-
RF Cable
NEL or
(provided)
AV mode
Recorder
C
TV Receiver
S-Video Cable
(provided)
21-pin SCART Cable
(not provided)
Player
NOTES:
All necessary cables can be obtained from your dealer.
For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.
When you select EDIT to dub tapes in step 3, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (
If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this
recorder's S-VIDEO and AUDIO input/output connectors.
When Using Your Video Recorder As The Source Player ...
... connect its rear panel S-VIDEO and AUDIO output
connectors to the recording deck's S-Video and Audio input connectors.
When Using Your Video Recorder As The Recording Deck ...
... connect its front panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors.
Then, set the recorder's input mode to "S-1".
Your recorder
Another recorder
Recorder Your recorder
Another recorder
B
Recorder Your recorder
21-pin SCART Cable
(not provided)
Another recorder
Player
43
EN
TV Receiver
RF Cable
VIDEO
(provided)
CHANNEL
or AV
mode
pg. 11).