JVC HR-S9600EU Instructions Manual page 52

52
EN
Perfect Connections
This is an example of recommended connection if you
have both satellite tuner and decoder.
Connect the decoder to the satellite tuner's connector, AV1 IN/
OUT connector to TV's connector, and AV2 IN/DECODER
connector to the satellite tuner's connector. Then connect the
satellite tuner and TV.
Satellite Tuner Unit
DECODER
Back of Recorder
Mains outlet
Outdoor Unit
Satellite Cable
VCR TV
Decoder
AV1 OUT
S OUT
COMP. Y/C
SYSTEM CONNECTIONS (cont.)
NOTES:
Set "AV2 SELECT" to "AV2". (
You can use Automatic Satellite Program Recording function
( pg. 35) with this connection.
To view a programme via the satellite tuner, select L-2 mode
by pressing NUMBER keys and/or TV PROG so that
"L-2" appears on the display panel.
To receive a scrambled broadcast, descramble the signal with
the satellite tuner.
For details, refer to the instruction manual for the satellite
tuner and decoder.
Aerial
TV Aerial
cable
ANT. IN
RF OUT
SYNCHRO EDIT
JLIP
ANT. IN
AV1 IN/OUT L
AUDIO
OUT
R
AV2 IN/DECODER
PAUSE/R.A. EDIT
RF OUT
pg. 44)
21-pin AV input
connector (SCART)
Back of TV
EXT.2 EXT.1
Aerial
connector