Bilingual Programmes - JVC HR-S9600EU Instructions Manual

Hi-Fi Audio Recording Level
Control
Your recorder allows manual adjustment of the Hi-Fi audio
recording level.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS HI-FI REC LEVEL
CONTROL SCREEN
2
Press %fi to move the highlight bar (pointer) to "REC
LEVEL CTL", then press OK or
ADJUST AUDIO
RECORDING LEVEL
3
Press % or fi.
Press % or fi briefly 5 times to move the on-screen's
audio levels by one division on the scale. To move the
audio levels faster, keep % or fi pressed.
Adjust the recording level while watching the
recorder's audio level meters. Set the level so that
maximum volume causes the meters to vary between
0dB to 4dB.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
Noise will increase if the recording level is too low, while
distortion will increase if the level is too high.
When you finished Hi-Fi Audio recording, be sure to set the
level control back to its centre position.
AUDIO MONITOR
#
.
HI-FI REC LEVEL CONTROL
+
MIN
[5 ∞ ]
[MENU] : EXIT
Receiving Stereo And

Bilingual Programmes

Your recorder is equipped with a Sound-Multiplex decoder (A2) and
a Digital stereo sound decoder (NICAM) making reception of stereo
and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
Type of Broadcast
Being Received
A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
To listen to a stereo programme, press AUDIO (or AUDIO
MONITOR) until " " and " " appear on the front display
panel or "HIFI L
To listen to a bilingual programme, press AUDIO (or AUDIO
MONITOR) until " " or " " appears on the front display
panel, or "HIFI L
required).
To listen to the Standard (regular monaural) audio while
receiving a NICAM broadcast, press AUDIO (or AUDIO
MONITOR) until "NORM" appears on the front display panel
or on the screen.
NOTE:
"O.S.D." must be set to "ON" or the on-screen displays will not
appear ( pg. 11).
To Record Stereo And
Bilingual Programmes (A2)
MAX
Stereo programmes are automatically recorded in stereo on
the Hi-Fi audio track (with the normal audio track recording
mixed L and R channel sound).
Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack will be recorded
on the normal audio track.
To Record NICAM Stereo And
Bilingual Programmes
The NICAM audio programme will be recorded on the Hi-Fi
audio track, and the Standard audio programme on the normal
audio track.
NOTES:
If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
Before playing back a programme recorded in stereo, or a
bilingual programme, refer to "Soundtrack Selection" (
On-screen Display
ST
BIL
(none)
ST NICAM
BIL NICAM
NICAM
R" appears on the screen.
" or "HIFI R" appears on the screen (as
25
EN
pg. 19).