S-Video Connection - JVC HR-S9600EU Instructions Manual

S-VIDEO Connection

Back of TV
Mains outlet
Back of Recorder
To Connect to A TV With S-VIDEO/AUDIO IN Connectors . . .
CONNECT RECORDER TO
TV
1
a– Connect the aerial, recorder and TV as per "RF
CONNECTION" (
b– Connect the recorder's S-VIDEO OUT connector to
the TV's S-VIDEO IN connector.
c– Connect the recorder's AUDIO OUT connectors to
the TV's AUDIO IN connectors.
CONNECT RECORDER TO
MAINS
2
Plug the end of the mains power cord into a mains
outlet.
After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the recorder's
front display panel when the
page 6 to perform Auto Set Up.
Aerial terminal
S-VIDEO IN
connector
AUDIO IN
connectors
Mains Power Cord
RF Cable (provided)
pg. 4).
button on the recorder/remote control is pressed for the first time to power on the recorder; go to
S-Video cable (provided)
Audio cable (not provided)
S-VIDEO OUT
AV1 OUT
S OUT
AV1 IN/OUT
COMP. Y/C
AV2 IN/DECODER
AUDIO OUT
NOTES:
You can obtain high-quality S-VHS pictures.
If your television is not stereo-capable, use the recorder's
AUDIO OUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction. (
To operate the recorder with your TV using the S-VIDEO
connection, set your TV to the VIDEO (or AV mode).
For switching the TV's mode, refer to the instruction manual
of your television.
Aerial or Cable
ANT. IN
SYNCHRO EDIT
JLIP
ANT. IN
L
AUDIO
OUT
R
PAUSE/R.A. EDIT
RF OUT
RF OUT
pg. 55)
5
EN