Table of Contents
Advertisement
32
CAN CEL
START+/ –
Downloaded from:
https://www.usersmanualguide.com/
6
q
2
1
2
3
6
4
5
7
8
9
0
TV PRO G.
O K
TIM ER RECO RD IN G(cont.)
Check And Ca ncel
Progra mmes
ACCESS PRO GRAMME
SCREEN
1
Press PRO G CH ECK. Each time you press the next
program's information appears.
● Press
O K and watch the front display panel as the
Start and Stop times, the Date and the Preset appear.
● If the recorder is turned on and the TV is set to its
VIDEO mode, you can check program information on
screen as well.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2 .
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press CAN CEL .
All information you input is deleted.
REVISE PRO GRAMME IN -
FO RMATIO N
2
Input the appropriate data using the START +/ –, STO P
+/ –, D ATE +/ – and TV PRO G. +/ – buttons on the
remote control.
Timer W a rning
If you have programmed your
recorder to timer-record a
programme or a series of
programmes, a warning appears
on screen to tell you that the
recording is to start in 5 minutes.
N O TES:
● The warning only appears if you're not in the Timer mode at
that time.
● If this recorder is being used as the player for tape dubbing,
the warning screen is recorded on the tape in the other video
recorder.
The warning blinks for the entire 5 minutes leading up to the
start of timer recording. To clear the display, press CAN CEL .
– WARNING–
TIMER RECORDING
TO START SOON
[CANCEL]
Advertisement
Table of Contents
