To observe!
Effectivity: 912 Serie
OM Edition 2 / Rev. 0
Reduction gear with shock absorber
NOTICE
WARNUNG
Step
1
To prevent impact load, start with throttle lever
in idle position or at the most up to 10% open.
2
For the same reason, wait for around 3 sec. af-
ter throttling back to partial load to reach con-
stant speed before re-acceleration.
3
For checking the two ignition circuits, only one
circuit may be switched off and on at a time.
BRP-Powertrain
Since the engine comprises a reduction gear
with shock absorber, take special care of the
following:
Procedure
page 3-8
April 01/2010