Engine run
Vacuum pump
Effectivity: 912 Serie
OM Edition 2 / Rev. 0
-
Never operate the engine without sufficient quantities of ope-
rating fluids (oil, coolant, fuel).
-
Never exceed the maximum permitted operational limits.
-
In the interest of safety, the aircraft must not be left unattended
while the engine is running.
-
To eliminate possible injury or damage, ensure any loose
equipment or tools are properly secured before starting the en-
gine.
-
Allow the engine to cool at idle for several minutes before turn-
ing off the engine.
-
This engine may be equipped with a vacuum pump. The safety
warning accompanying the vacuum pump must be given to the
owner/operator of the aircraft into which the vacuum pump is
installed.
BRP-Powertrain
page 1-7
April 01/2010