Installing And Adjusting Paper Near End Sensor; Installing Paper Near End Sensor; Adjusting Paper Near End Sensor - SNBC BT-T080R User Manual

BT-T080R User's Manual

4.4 Installing and adjusting paper near end sensor

4.4.1 Installing paper near end sensor

Refer to the following figure, plug the paper near end sensor into the outward paper near end sensor
socket after installing the cantilever module on print mechanism.
Figure 4.4.1 Installing paper near end sensor

4.4.2 Adjusting paper near end sensor

The paper near end sensor module is located on the paper roll guide of the cantilever holder, and we need
to install the cantilever holder onto the print mechanism firstly. Refer to the following figure, the paper near
end sensor has five levels. Rotate the paper roll guide while using to ensure that the direction mark of the
paper roll guide is always upward.
Figure 4.4.2 Adjusting paper near end sensor
Refer to the above figure, push the paper near end spanner by hand, and make the sensor reach the
scheduled level.
- 28 -