Paper Near End Sensor Replacement; Caution - SNBC BK-T6112 Service Manual

4.4.6 Paper near end sensor replacement

1.
2.
3.

4.4.7 Caution

Do not use organic solvents like gasoline and acetone to clean sensors.
Tools: Cross screw driver, cut plier.
Figure
- 26 -
BK-T6112 Service Manual
Description
Overview of cantilever paper holder.
Disassemble the one M4x8 pan head
screw with cross screw driver, and take off
the paper roll baffle.
①—M4×8 pan head screw
②—Paper roll baffle
Disassemble the one ST2.6x6 pan head
self-tapping screw with cross screw driver,
and take off the paper near end sensor.
①—ST2.6×6 pan head self-tapping screw
②—Paper near end sensor
Note: When taking off the paper near end
sensor, cut the cable tie of connecting
cable for fixing the sensor short in
advance.