Software Installation; Figure 4-18: Vga Connector - IEI Technology PICOe-PV-D510 User Manual

PICOe-PV-D510 User Manual
insert the male connector from the VGA screen into the female connector on the
PICOe-PV-D510. See

Figure 4-18: VGA Connector

Step 6: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.

4.9 Software Installation

All the drivers for the PICOe-PV-D510 are on the CD that came with the system. To install
the drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
NOTE:
If the installation program doesn't start automatically:
Click "Start->My Computer->CD Drive->autorun.exe"
Step 2: The driver main menu appears (Figure 4-19).
F igure 4-18.
6
Step 0:
Page 63