Rear Panel - Arris Touchstone WBM650 User Manual

Safety Getting Started
Wideband Modem Rear Panel
A B C
Home Prev Next
Installation

Rear Panel

The rear of the Wideband Modem has the following connectors and controls:
D
WBM650 Wideband Modem User's Guide
Usage
A Power: plug the AC adapter in here.
B Ethernet connector: a 10/100/1000 Base-T interface for connecting the
Wideband Modem to a PC or home network LAN. The Ethernet connector is
compatible with 1000 Mbps (Gigabit), 100 Mbps (Fast), and 10 Mbps at-
tached CPE devices. Recommended connections are 100 Base-T or 1000
Base-T to achieve best performance.
Note: To avoid reduced data throughput performance, do not connect the
Wideband Modem to a 10 Mbps device. Certain routers or wireless devices
may also reduce performance.
C Reset button: resets the Wideband Modem as if you disconnected power.
Use a pointed non-metallic object to press this button.
D Cable: plug the coax cable
Troubleshooting
in here.
Glossary
14