Table of Contents
Advertisement
Tips -
system.
The Norstar system cannot verify that the number you assign
as an external direct-dial telephone is valid. Check the
number before assigning it, then call the direct-dial telephone
after you've assigned it to test it.
You cannot forward calls to any direct-dial telephone that is
outside your Norstar system. For more information, refer to
the Modular ICS 6.0 System Coordinator Guide.
CAP assignment
This setting designates a telephone as a central answering
position (CAP). The CAP must be an M7324 telephone, and
may have one or two CAP modules attached. A maximum of
five CAPs can be installed in a Norstar system.
The CAP may be used to:
•
monitor the busy/not busy and Do Not Disturb status of
Norstar telephones
•
answer external calls on up to 120 lines, and extend calls
to other Norstar telephones
•
send up to 30 messages to other Norstar telephones
•
provide up to 96 extra memory buttons for the M7324
telephone
P0992638 03
There is just one direct-dial digit for the entire
System prgrming / 411
Installer password required
Modular ICS 6.0 Installer Guide
Advertisement
Table of Contents
Troubleshooting
