Configuring Alarms And Expired Alarms Settings - Nortel Modular ICS 6.0 Installer's Manual

Nortel modular ics 6.0 digital system package

Hide thumbs Also See for Modular ICS 6.0:

Table of Contents

If the number is less than 13, the display shows AM. Press

CHANGE to select PM, if required. Press OK to accept.

4. Press ≠. Minutes: 00 displays.

5. Press CHANGE and enter the minutes (00 to 59).

Configuring alarms and expired alarms settings

Use this feature to create the alarm settings that will govern the

alarm features for both the administrative and room sets.

1. At the Hospitality heading, press ≠ until Alarm

2. Press ≠. Attn attempts:3 displays.

3. Press CHANGE until you find the number you want (1-5).

4. Press '. Retry intrvl:4 displays.

5. Press CHANGE until you find the number you want

(2, 4, 6, or 8).

6. Press '. Attn duration: 15 displays.

7. Press CHANGE until you find the number of seconds you

want (10, 15, 20, 30, 40, 50).

8. Press '. Time format:12 hr displays.

9. Press CHANGE to choose either 12hr or 24hr.

10. Press '. Expired alarms displays.

11. Press ≠. Notify set:None displays.

12. Press CHANGE to enter a set DN to be notified.

13. Press '. Use tone: N displays.

14. Press CHANGE to choose either Y (yes) or N (no).

System prgrming / 441

Modular ICS 6.0 Installer Guide