Trunk Module Line Numbering - Nortel Modular ICS 6.0 Installer's Manual

Trunk module line numbering

In MICS 6.0/MICS-XC 6.0 software, the line numbering for
all profiles has been adjusted to accommodate the Profile 2
ETSI requirement of 30 lines. This could affect applications
such as Norstar Voice Mail or CallPilot 150. The chart below
shows the line numbering transitions between the various
versions of software. Note also that target lines have been
renumbered.
Note: MICS 6.0 line numbering varies, depending on the
profile you choose for your system, and which type of
trunk module you are using, or what protocol you
choose for the module (DTI). Refer to TrunkMod on
page 467.
Line numbering for upgrades
Module Cartridge
Cd1-Mod8
Mod 08 Cd2-Mod8
Cd3-Mod8
Cd1-Mod7
Mod 07 Cd2-Mod7
Cd3-Mod7
Cd1-Mod6
Mod 06 Cd2-Mod6
Cd3-Mod6
Cd1-Mod5
Mod 05 Cd2-Mod5
Cd3-Mod5
P0992638 03
Planning the installation / 205
MICS 1.0 MICS 2.0,
and 3.0, 4.0, and
1.1 lines 5.0 lines
49-52 49-56
53-56 57-64
57-60 65-72
61-64 73-80
65-68 81-88
69-72 89-96
73-76 97-100
77-80 101-104
81-84 105-108
85-88 109-112
89-92 113-116
93-96 117-120
MICS 6.0
lines
61-68
69-76
77-84
85-92
93-100
101-108
109-112
113-116
117-120
121-124
125-128
129-132
Modular ICS 6.0 Installer Guide