System Administration Log; Checking The Items In The Log - Nortel Modular ICS 6.0 Installer's Manual

502 / System administration log

System administration log
The System administration log keeps a record of
administrative events such as sessions in which a change was
made, invalid password attempts, and password changes.
You can use this feature to:
• check the items in the log
• erase the log
• check when each item in the log occurred
The System administration log holds a maximum of 10 items.
Erase the log after dealing with all the items.

Checking the items in the log

Start with the display showing Sys test log:
1. Press '. The display shows Sys admin log.
2. Press ≠. The display reads Items in log:. (If
there is no log entry, the display reads Items in log:0.)
3. Press ' or ". The display shows a log
item.
4. Write down the item on the System administration log
record.
5. Repeat steps 3 and 4 until you have recorded all the items.
Modular ICS 6.0 Installer Guide P0992638 03