Voice Mail Configuration - Nortel Modular ICS 6.0 Installer's Manual

Nortel modular ics 6.0 digital system package

Hide thumbs Also See for Modular ICS 6.0:

Table of Contents

154 / Private networking using PRI SL-1

5. Press ' until the prompt displays Telco

6. Press ≠. The prompt displays VMsg Center 1.

7. Press ≠. The prompt displays Use:.

8. Press CHANGE to until you reach Routing tbl.

9. Press '. The prompt displays Tel #:.

10. Enter the number to access the external Auto Attendant

11. Exit programming.

Voice mail configuration

On the voice mail system, set the following parameters:

Set Redirected DN to Yes.

Under the F983 AA promopt, set ANS: Y for the voice

main DN assigned target line.

Under F983 dial 77 and set External init as Y.

From the CVM/CAA lines, use the default greeting table 1.

For detailed directions, refer to the addendum titled: Installing

Norstar Voice Mail as a Centralized Voice Mail System.

Modular ICS 6.0 Installer Guide

Do you have a question about the Modular ICS 6.0 and is the answer not in the manual?