User Prefernces - Nortel Modular ICS 6.0 Installer's Manual

User prefernces

Any programming a user can do at a set can also be done
through User prefernces. In the following table, the default
settings are given in bold.
Setting
Model
Button prgrming
User speed dial
Call log opt'ns
Dialing opt'ns
Language
Display cntrst
Ring type
Voice path
For more information, refer to the Modular ICS 6.0 System
Coordinator Guide.
P0992638 03
Allows you to pre-program the model of Norstar set
which will use this DN (M7208).
Note: M7100 is used for T7100; M7208 is used for
T7208, M7310 is used for T7316.
Allows you to program the buttons with internal and
external autodialers and/or programmed feature keys.
Allows you to program user speed dialers
(No defaults). (speed dial codes 256 to 279)
Allows you to select how the set will log calls:
Log all calls, No autologging, No one answered, or
Unanswered by me.
Allows you to select how the system will dial for this
set: Standard dial, Pre-dial or Automatic dial.
Allows you to choose the language that will display on
the set. The choices are based on the Profile chosen
when the system was set up.
Profile 1, 3 and 4: English, French or Spanish.
Profile 2: English, French, Spanish and Turkish
Allows you to adjust the contrast of the display
1, 2, 3, 4, 5.....9
Allows you to select a ring type 1, 2, 3, 4
Allows you to select Handsfree or Headset.
Terminals&Sets / 321
Description
Modular ICS 6.0 Installer Guide