Host Delay; Link Time; Alarmset - Nortel Modular ICS 6.0 Installer's Manual

Nortel modular ics 6.0 digital system package

Hide thumbs Also See for Modular ICS 6.0:

Table of Contents

406 / System prgrming

Host delay

Host delay allows you to assign the delay between the moment

an outgoing line is selected to make an external call, for

example, by lifting the receiver off the telephone, and the

moment that Norstar sends dialed digits or codes on the line.

Press CHANGE to select the setting: 200, 400, 600, 800, 1000,

1200, 1400, 1600, 1800, or 2000 milliseconds.

present before the dialing sequence is sent. Minimizing this

delay provides faster access to the requested features.

Link time allows you to specify the duration of a signal

required to access a feature through a remote system.

Press CHANGE to select the setting: 100, 200, 300, 400, 500,

600, 700, 800, 900, or 1000 milliseconds.

For example, to program external dialing through a Centrex

system, which requires a Link time of 400 ms, specify a Link

time of 400.

requirements of the host switching system that must be

Link is another name for Recall or Flash.

Alarm set allows you to assign a telephone on which alarm

messages appear when a problem has been detected in the

Modular ICS 6.0 Installer Guide

Host delay is provided to ensure that a dial tone is

The Link time required depends on the

Installer password required