Changing The Default Template; Changing The Starting Dn - Nortel Modular ICS 6.0 Installer's Manual

302 / Startup programming
Tips -
normally used for Startup. For a system which has already
been programmed, the Installer password might have been
changed in programming and recorded in the Programming
Record .

Changing the default template

After entering the Startup access code and Installer password
the set displays Reset memory?.
1. Press YES to select a default template.
The display shows the current template.
2. Press CHANGE to choose the appropriate template.

Changing the starting DN

You can change the starting number for your telephone
directory numbers (DNs). This is helpful when your system is
part of a network and you want to use a uniform series of
directory numbers for all telephones in your network.
With the display showing the current template.
1. Press '.
The display shows the current start DN.
2. Press CHANGE.
Modular ICS 6.0 Installer Guide
The Installer password shown is the default
Changing the template resets programming!
If you change your system template on an
existing system, your programming will be reset
to the defaults.
If this happens, perform an immediate restore
from your backups.
P0992638 03