Restrn Filters; Line Restrns - Nortel Modular ICS 6.0 Installer's Manual

350 / Lines

Restrn filters

Restriction filters are groups of dialing restrictions and dialing
overrides for external numbers or feature codes. By packing a
set of restrictions and overrides in one group, you can assign
them to a line in one step, as a single package.
You can make changes to restriction filters under both
Terminals&Sets, and Lines. Any changes will take affect
for any telephone, line, or line on a telephone, regardless of
where the programming was changed.
See the description and procedures in Restrictions on page
349.

Line restrns

Specify the filter to be applied to this line to restrict the
numbers that can be dialed on it. You can assign a different
restriction filter for normal service and for each of the six
schedules. See the section on Services for more information
about the schedules.
Use ≠, CHANGE and the dialpad to enter the number
of the restriction filter to be assigned as the line restriction for
each schedule.
The default restrictions are shown in the table below:
Default filters for lines
Schedule
Normal
Sched 1 (Night)
Sched 2 (Evening)
Sched 3 (Lunch)
Modular ICS 6.0 Installer Guide
Restriction filter
03
21
22
23
P0992638 03