Oli - Nortel Modular ICS 6.0 Installer's Manual

1. Press ≠ and enter the Answer DN.
2. Press CHANGE to change the setting for the Answer DN:
Unassigned, Appr&Ring or Appr only.
3. To assign additional Answer DNs, press ', then
enter the next Answer DN.
Tips -
this telephone.
Every Answer DN assigned to the telephone automatically
assigns an Answer button with an indicator to the telephone.
These buttons should be labeled accordingly, identifying the
telephone with its name or DN.
The maximum number of Answer DNs that can be assigned to
a particular set is eight.
More than one telephone can have an Answer button for the
same DN. In this way, more than one telephone can provide
call alerting and call answering for any calls directed to that
DN.
When a call to a Norstar set is received via Call Forwarding,
the Answer DN for that set will not alert.

OLI #

Some ISDN devices may require the network Called Number
digits, called the outgoing line identification (OLI), to be able
to accept a call. The OLI as called # parameter permits the
OLI digits to replace the internal DN digits of the ISDN device
during call setup. To enable this capability, set the OLI as
called # parameter to Y for all DNs used by the device.
1. At Terminals&Sets, press ≠ and enter the
ISDN set number.
The set displays 221:221.
2. Press ≠ twice to reach Line Assignment.
P0992638 03
SCAN
Press to view the Answer DNs assigned to
Terminals&Sets / 315
Modular ICS 6.0 Installer Guide