Introduction To The Internet Telephone Switch Module - Nortel i2004 Installation Manual

Introduction to the Internet Telephone Switch Module

IMPORTANT: The steps included in this guide supplement the installation
instructions included in The i2004 Internet Telephone Getting Started guide
that came with your telephone.
The Nortel Networks Internet Telephone Switch Module is a peripheral device
which provides added capability to the Nortel Networks i2004 Internet
Telephone. With the Internet Telephone Switch Module installed you can run your
PC and your i2004 Internet Telephone with one Ethernet connection into your
office. This device prioritizes voice traffic at the point of interface to the
customer's LAN ensuring voice calls always have access to the customer's Data
Network. Voice prioritization and quality beyond the device interface is
contingent on the quality of service the Data Network features provided between
the endpoints of the voice call.
What is in the box
Check the contents of your Internet Telephone Switch Module package to make
sure you have all of the parts listed below.
• Internet Telephone Switch Module
• Internet Telephone Switch Module Installation Guide
• Short power cord
• Short Ethernet cable
• AC Power adapter
• AC Power adapter cord (North America only; International order separately)
IMPORTANT: When using the Internet Telephone Switch Module, you MUST use the
power adapter provided. Do not use the power adapter that came with your
i2004 Internet Telephone
Refer to the contents of your i2004 Internet Telephone package when assembling
the Internet Telephone Switch Module with the i2004 Internet Telephone.
Internet Telephone Switch Module Installation Guide
Do not plug in both power adapters.
.
3
P0919850 Issue 02