Table 11: Device Configuration - Status; Table 12: Device Configuration - Basic Settings - Grandstream Networks BudgeTone-200 User Manual

Artikel 401102 aus Shop: http://www.netzwerk-online.de
This section will describe the options in the Web configuration user interface. As mentioned, a used can
log in as an administrator or end-user.
Functions available for the end-user are:
Status: Displays the network status, account statuses, software version and MAC-address of the
N
phone
Basic: Basic preferences such as date and time settings, multi-purpose keys and LCD settings
N
can be set here.
Additional functions available to administrators are:
Advanced Settings: To set advanced network settings, codec settings.
N
Account: To configure each of the SIP accounts.
N

Table 11: Device Configuration - Status

MAC Address
IP Address
Product Model
Part Number
Software Version
System Up Time
System Time
Registered
PPPoE Link Up
Table 12: Device Configuration – Basic Settings
End User
Password
IP Address
Grandstream Networks, Inc.
The device ID, in HEXADECIMAL format.
This field shows IP address of BT
This field contains the product model information.
This field contains the product part number.
Program: This is the main software (firmware) release number, always used to
N
identify the software (firmware) system of the phone.
Boot: Booting code version number
N
This field shows system up time since the last reboot.
This field shows the current time in the phone.
Indicates whether accounts are registered to the related SIP server(s). BT can
support four unique SIP profiles.
Indicates whether the PPPoE connection is enabled (connected to a modem).
This contains the password to access the Web Configuration Menu. This field is
case sensitive with a maximum length of 25 characters.
There BT operates in two modes:
1. DHCP mode: all the field values for the Static IP mode are not used (even
though they are still saved in the Flash memory.) The BT acquires its IP
address from the first DHCP server it discovers on its LAN. The DHCP
option is reserved for NAT router mode. To use the PPPoE feature, set the
PPPoE account settings. The BT establishes a PPPoE session if any of the
PPPoE fields are set.
2. Static IP mode: configure all of the following fields: IP address, Subnet
Mask, Default Router IP address, DNS Server 1 (primary), DNS Server 2
(secondary). These fields are set to zero by default.
BT200/201 User Manual
Firmware 1.2.2.19
Page 21 of 33
Last Updated: 12/2009