Table 13: Device Configuration - Status; Table 14: Device Configuration - Settings/Basic Settings - Grandstream Networks GXP21 Series User Manual

Table 13: Device Configuration - Status

MAC Address
IP Address
Product Model
Part Number
Software Version
System Up Time
System Time
Registered
PPPoE Link Up
Service Status
Core Dump
Table 14: Device Configuration – Settings/Basic Settings
End User Password
IP Address
Grandstream Networks, Inc.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
The device ID, in HEXADECIMAL format.
This field shows IP address of GXP21xx.
This field contains the product model information.
This field contains the product part number.
• Program: This is the main firmware release number, which is always used for
identifying the software (or firmware) system of the phone.
• Boot: Booting code version number
• Core: Core code version number
• Base: Base code version number
• DSP: DSP code version number
• Aux: Aux code version number
This field shows system up time since the last reboot.
This field shows the current time on the phone system.
Indicates whether accounts are registered to the related SIP server.
Indicates whether the PPPoE connection is enabled (connected to a modem).
• GUI: shows the GUI status: running or stopped
• Phone: shows the phone status: running or stopped
Download core dump file for troubleshooting when necessary.
This contains the password to access the Web Configuration Menu. This field is case
sensitive with a maximum length of 25 characters.
The GXP21xx operates in two modes:
1. DHCP mode: all the field values for the Static IP mode are not used (even
though they are still saved in the Flash memory.) The GXP21xx acquires its
IP address from the first DHCP server it discovers on its LAN. The DHCP
option is reserved for NAT router mode. To use the PPPoE feature, set the
PPPoE account settings. The GXP21xx establishes a PPPoE session if any
of the PPPoE fields is set.
2. PPPoE mode: configure all of the following fields: PPPoE account ID,
PPPoE password and PPPoE service name.
3. Static IP mode: configure all of the following fields: IP address, Subnet
Mask, Default Router IP address, DNS Server 1 (primary), DNS Server 2
(secondary). These fields are set to zero by default.
GXP21xx User Manual
Firmware version: 1.0.1.66
Page 24 of 41
Last Updated: 05/2011