Saving The Configuration Changes; Rebooting The Phone Remotely - Grandstream Networks BudgeTone-200 User Manual

Artikel 401102 aus Shop: http://www.netzwerk-online.de
Preferred Vocoder
SRTP Mode
Special Feature
S C
AVING THE ONFIGURATION
After the user makes a change to the configuration, press the "Update" button in the Configuration Menu.
The web browser will then display a message window to confirm saved changes.
Grandstream recommends reboot or power cycle the IP phone after saving changes.
R P
EBOOTING THE HONE
Press the "Reboot" button at the bottom of the configuration menu to reboot the phone remotely. The web
browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in
again.
Grandstream Networks, Inc.
BT supports up to 5 different Vocoder types including G.711(a/µ) (also known as
PCMU/PCMA), GSM, G.723.1, G.729A/B.
Configure Vocoders in a preference list that is included with the same preference
order in SDP message. Enter the first Vocoder in this list by choosing the
appropriate option in "Choice 1". Similarly, enter the last Vocoder in this list by
choosing the appropriate option in "Choice 8".
Enable SRTP mode based on selection. Default is No.
Default is Standard. Choose the selection to meet special requirements from Soft
Switch vendors.
C
HANGES
R
EMOTELY
BT200/201 User Manual
Firmware 1.2.2.19
Page 30 of 33
Last Updated: 12/2009