Grandstream Networks BudgeTone-200 User Manual page 27

Artikel 401102 aus Shop: http://www.netzwerk-online.de
Account Name
SIP Server
Outbound Proxy
SIP User ID
Authenticate ID
Authenticate Password
Name
Use DNS SRV
User ID is Phone
Number
SIP Registration
Un-register on Reboot
Register Expiration
Local SIP Port
SIP Registration Failure
Retry Wait Time
SIP T1 Timeout
SIP T2 Interval
SIP Transport
Use RFC3581
Symmetric Routing
Grandstream Networks, Inc.
The name associated with each account - displayed on LCD.
SIP Server's IP address or Domain name provided by VoIP service provider.
IP address or Domain name of Outbound Proxy, Media Gateway, or Session
Border Controller. Used for firewall or NAT penetration in different network
environment. If the system detects symmetric NAT, STUN will not work. ONLY
outbound proxy can provide solution for symmetric NAT.
User account information provided by VoIP service provider (ITSP); either an
actual phone number or formatted like one.
SIP service subscriber's Authenticate ID used for authentication. It can be
identical to or different from SIP User ID.
SIP service subscriber's account password for BT to register to (SIP) servers of
ITSP.
SIP service subscriber's name that is used for Caller ID display.
Default is No. If set to "Yes", the client will use DNS SRV to look up server.
If the phone has an assigned PSTN telephone number, this field should be set to
"Yes". Otherwise, set it to "No". If "Yes" is set, a "user=phone" parameter will be
attached to the "From" header in SIP request
This parameter controls sending REGISTER messages to the proxy server. The
default setting is "Yes".
Default is No. If set to "Yes", the SIP user's registration information will be
cleared on reboot.
This parameter allows user to specify the time frequency (in minutes) that BT
refreshes its registration with the specified registrar. The default interval is 60
minutes. The maximum interval is 65,535 minutes (about 45 days).
This parameter defines the local SIP port used to listen and transmit. The default
value for Account 1 is 5060. It is 5062, 5064, 5066 for Account 2, Account 3 and
Account 4 respectively.
Retry registration if the process failed. Default is 20 seconds.
RFC 3261 SIP T1 timer. Default is 1 second.
RFC 3261 SIP T2 timer. Default is 0.5 seconds.
Choose SIP Transport between UDP and TCP. Default is UDP.
This option allows a SIP client to request that the server send the response back
to the source IP address and port from which the request originated.
BT200/201 User Manual
Firmware 1.2.2.19
Page 27 of 33
Last Updated: 12/2009