Configuration Via Web Browser - Grandstream Networks BudgeTone-200 User Manual

Artikel 401102 aus Shop: http://www.netzwerk-online.de
Press MENU to hear the selected ring tone, press ';' or '9' to select the stored ring tones.
11 Display "[11]trANSPOrt"
Press MENU to select SIP Transport.
Factory Reset Display " -- rESEt --". Please be very careful when using this function.
Two options: factory reset or manual reboot.
Factory Reset:
1. Key in the physical / MAC address on back of the phone.
2. Press MENU to reset phone to FACTORY DEFAULT settings. All your setting will be
erased.
Manual Reboot: Press MENU without keying anything.
Others When phone is powered on and time is displayed
Press ';' or '9', Display " ring [4] ", press ';' or '9' again to hear and adjust the ring tone
volume, from 0 (off) to 7 (maximum), off and on hook to set
Press SPEAKERPHONE button, or off hook and pick up handset, press ';' or '9' to adjust
the speakerphone/headset or handset volume
C VIA W
ONFIGURATION
The BT embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages
allow a user to configure the IP phone through a Web browser such as Microsoft's IE or Mozilla Firefox.
Access the Web Configuration Menu
To access the phone's Web Configuration Menu
Connect the computer to the same network as the phone
N
Make sure the phone is turned on and shows its IP-address
N
Start a Web-browser on your computer
N
Enter the phone's IP-address in the address bar of the browser
N
Enter the administrator's password to access the Web Configuration Menu
N
1
The Web-enabled computer has to be connected to the same sub-network as the phone. This can
easily be done by connecting the computer to the same hub or switch as the phone is connected to. In
absence of a hub/switch (or free ports on the hub/switch), please connect the computer directly to the
phone using the PC-port on the phone.
2
If the phone is properly connected to a working Internet connection, the phone will display its IP
address. This address has the format: xxx.xxx.xxx.xxx, where xxx stands for a number from 0-255. You
will need this number to access the Web Configuration Menu. e.g. if the phone shows 192.168.0.60,
please use "http://192.168.0.60" in the address bar your browser.
3
The default administrator password is "admin"; the default end-user password is "123".
NOTE: When changing any settings, always SUBMIT them by pressing the button on the bottom of the
page. Reboot the phone to have the changes take effect. If, after having submitted some changes, more
settings have to be changed, press the menu option needed.
Definitions
Grandstream Networks, Inc.
B
EB ROWSER
BT200/201 User Manual
Firmware 1.2.2.19
1
2
3
Last Updated: 12/2009
Page 20 of 33