MQRB5143 Single Sided Framing
An MQRB5143BK Kit is required for a Single Sided Installation.
Before you begin Framing- Determine whether the Wall Surface will be flush with the face of the fireplace (Fireplace
Note: If using optional surround, maximum thickness for non-combustible material is 3/4".
Wood Framing Stud Rotated for Vent Clearance
and wall to be covered with Non-Combustibles, such as tile), or the Framing will be flush
with the face of the fireplace (Flat Wall appearance).
* 17" Min. Dimension is for Wall Surface Flush with fireplace.
Add 1/2" to this Dimension where a non-combustible wall surface will
cover the unit (See Nailing Tab Guide Page also).
17" Min. *
Airbox must maintain Min. 1" Clearance
From Combustible [Wood] Framing.
Wood Framing Studs Must be Rotated
Framing Style shown is for illustration purposes only.
This structure is NOT load bearing.
[Steel Stud Framing Shown]
(Continued)
23