Mqrb4436 / Mqrb5143Sk / Mqrb6961Sk (See Thru Kit) Installation - Marquis Infinite MQRB4436N Installation Instructions Manual

MQRB44SK / MQRB51SK / MQRB69SK (See Thru Kit) Installation
This basic Kit is required for See Thru installations.
Note: To cover the Side Fillers with non-combustible materials, they must be installed before Facing materials are applied.
Warning
Components:
[2ea.] Side Fillers
Valve Access Cover
Glass Door c/w Glass
See Thru False Bottom c/w Pilot Shield
[4ea.] #6 Black Screws
[8ea.] ¼" DT Screws
Installation Procedure:
1. Side Fillers
Place Side Filler onto Side of
Fireplace opening. Attach with [2]
#6 Screws provided. Repeat for
the other side.
2. False Bottom
Insert False Bottom into Fireplace.
Fasten the False Bottom to the
Burner Assembly using the DT
Screws provided. Insert Pilot
Shield into False Bottom.
3. End Panels
Remove the Liner Retainer Clips
in the Firebox Top. Place End
Panels into Firebox on top of the
False Bottom and tilt into place at
either end of the Firebox. Replace
the Liner Retainer Clips.
4. Door
Place the bottom of the door into
the door retainer slot, and then
secure the door with the top
latches (See Door and Glass
Information in manual if more
information is required).
5. Valve Access Cover
To locate Valve Access Cover,
engage the tabs into the slots in
the Access Panel Brackets on the
Fireplace.
Note: Warping and Discoloration of Porcelain or Painted Metal Liners Is Not Covered Under Warranty. Both Porcelain and
Painted Metal Liners may discolor and warp during normal operation of your appliance. This is normal, and not considered a defect.
: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
13-1/8" for MQRB6961
13-1/8" for MQRB6961
41