SETTING UP:
When one Sensor is used
1.
First, insert the batteries into the temperature sensor. (see "Install and replace
batteries in the temperature sensor").
2.
Immediately after and within 1 minute, insert the batteries into Temperature Station
(see "Install and replace batteries in the Temperature Station"). Once the
batteries are in place, all segments of the LCD will light up briefly. Following the time
as 12:00 and the indoor temperature will be displayed. If these are not displayed
•
Remote transmission of outdoor temperature to
Temperature Station by 915 MHz
•
Water-resistant casing
•
Wall mounting case (Mount in a sheltered place. Avoid
direct rain and sunshine)
6