Lcd Contrast Setting; 12/24 Hour Time Display Setting; Manual Time Setting; Calendar Setting - La Crosse WS-1912 Quick Setup Manual

MANUAL SETTINGS:
The following manual settings can be changed once the SET key is pressed and held for
about 3 seconds:


LCD contrast setting



Manual time setting


12/24 hour time display


Calendar setting


°C/ °F temperature unit setting

Wind speed unit

Rainfall unit setting

Air pressure unit setting

Relative pressure reference value setting

Weather tendency threshold value

Storm warning threshold value

Alarm On/ Off setting
LCD CONTRAST SETTING
The LCD contrast has 8 levels, from "LCD 1" to "LCD8" (default setting is LCD 5):
1. Press the SET key, the contrast level digit will start flashing.
2. Use the + or MIN/MAX key to adjust the level of contrast.
3. Confirm with the SET key and enter the MANUAL TIME SETTING.
MANUAL TIME SETTING:
You then may manually set the time of the clock by following the steps below:
Minutes flashing
Hour
flashing
Digit flashing
11
1. The hour digit will start flashing.
2. Use the + or MIN/MAX key to set the hour.
3. Press the SET key to switch to the minutes. The minute digit will start flashing.
4. Use the + or MIN/MAX key to set the minutes (holding of the key will forward the
digit by 5)
5. Confirm the time with the SET key and enter the 12/24 HOUR TIME DISPLAY
SETTING.

12/24 HOUR TIME DISPLAY SETTING:

The time can be set to view as 12 hour or 24 hour format. The default time display mode is
"12h". To set to "24h" time display:
1. Use the + or MIN/MAX key to toggle the value.
2. Confirm with the SET key and enter the CALENDAR SETTING.
CALENDAR SETTING:
The date default of the Weather Station is 1. 1. of year 2009. The date can be set
manually by proceeding as follows.
1. The year digit starts flashing.
2. Use the + or MIN/MAX key to set the year (pressing and holding the key will forward
the digit by 5). The range runs from "00" (2000) to "99" (2099).
3. Press the SET key to confirm the year and enter the month setting. The month digit
will start flashing.
4. Use the + or MIN/MAX key to set the month.
5. Press the SET key to confirm the month and enter the date setting mode. The date
digit will start flashing.
Digit flashing
"Month. Date." (for 12h time display)
"Date. Month." (for 24h time display)
Year
12