Table of Contents
Advertisement
Quick Links
QUICK SET UP MANUAL - WS-1912 WEATHER CENTER
Using 915MHz wireless transmission of weather data, this unique weather station can be
powered using batteries for all your weather needs in the home or office.
INSTANT TRANSMISSION is the state-of-the-art
This product offers:
new wireless transmission technology,
exclusively designed and developed by LA
CROSSE TECHNOLOGY. INSTANT
TRANSMISSION offers you an immediate update
(every 4.5 seconds!) (every 6.25 seconds for
rain! optional) of all your outdoor data
measured from the transmitters: follow your
climatic variations in real-time!
Carefully open and check that the following contents are complete:
Item:
Consisting of:
Fittings:
Base
1) Main unit
Station
Thermo-
1) Main unit
1) Wall mounting
Hygro
2) Rain
Sensor
protection
2) Plastic anchors for
(TX31U-IT)
cover
3) 2 x cable ties
Illustration:
screws
screws
1
Wind
1) Main unit
1) 1 x U-bolts for
Sensor
with wind
(TX55U-IT)
vane
2) 2 x Washers
2) 32ft cable
3) 2 x Nuts
(already
4) 2 x cable ties
attached the
main unit)
3) Mast holder
SETTING UP:
Weather Center
Wireless transmission at
915 MHz - thermo-hygro
transmitter to weather
station
Thermo-hygro
transmitter
Cable connection between the wind sensor and
the thermo-hygro transmitter
mast holder
OPTIONAL
Wireless transmission
at 915 MHz – Self-
Emptying Rain sensor
to weather station
Rain sensor (sold separately)
(TX32U-IT)
Wind sensor
2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for La Crosse WS-1912
Summary of Contents for La Crosse WS-1912
- Page 1 QUICK SET UP MANUAL - WS-1912 WEATHER CENTER Wind 1) Main unit 1) 1 x U-bolts for Sensor with wind mast holder (TX55U-IT) vane 2) 2 x Washers Using 915MHz wireless transmission of weather data, this unique weather station can be...
- Page 2 Note: You may need to check the cable for correct connection and all the components for When putting the Weather Station into operation, it is correct function by manually turning the wind-gauge (cups); tilting the rain sensor to important to have them in close proximity (e.g. on a hear the impact of the internal moving seesaw, etc.
- Page 3 HOW TO INSTALL AND REPLACE THE BATTERIES IN THE WEATHER STATION The Weather Station works with 3 x AA, IEC LR6 1.5V batteries. When the batteries need to be replaced, the low battery symbol will appear on the LCD. To install or replace the batteries, please follow the steps below: Remove the battery compartment cover.
-
Page 4: Battery Change
In the event of changing batteries in any of the units, all units need to be reset by following SET key the setting up procedures. This is because a random security code is assigned by the Press and hold to enter manual setting modes: LCD contrast, Manual time setting, transmitter and rain sensor (optional) at start-up and this code must be received and 12/24 hour time display, Calendar setting, ºC/ ºF temperature unit, Wind speed unit, stored by the Weather Station in the first 90 seconds of power being supplied to it. - Page 5 Mode 1: Wind speed, outdoor temperature, relative air pressure are shown. Calendar / indoor Wind speed icon temperature / seconds Time display display Wind speed / gust* in mph, km/h, m/s Wind Chill in Outdoor temp °C or °F Weather forecast icon Icon Weather tendency...
-
Page 6: Lcd Contrast Setting
The hour digit will start flashing. Use the + or MIN/MAX key to set the hour. Press the SET key to switch to the minutes. The minute digit will start flashing. MANUAL SETTINGS: Use the + or MIN/MAX key to set the minutes (holding of the key will forward the The following manual settings can be changed once the SET key is pressed and held for digit by 5) about 3 seconds:... -
Page 7: Relative Air Pressure Unit Setting
Use the + or MIN/MAX key to set the date. Confirm the unit with the SET key and enter the RELATIVE AIR PRESSURE UNIT Confirm all calendar settings with the SET key and enter the °C/°F TEMPERATURE SETTING. UNIT SETTING. °C/°F TEMPERATURE UNIT SETTING RELATIVE AIR PRESSURE UNIT SETTING Flashing... -
Page 8: Storm Alarm On/ Off Setting
Note: STORM ALARM ON/ OFF SETTING This calibration facility is useful for those users living at various elevations above sea level, Note: the storm alarm ON/OFF setting is not available on this model. Skip and exit but wanting their air pressure display to be based on sea level elevation. this setting by pressing the SET key. -
Page 9: Warranty Information
Ltd or La Crosse Technology, Ltd’s authorized service center. For more information, please visit: La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated www.lacrossetechnology.com/1912 herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
Need help?
Do you have a question about the WS-1912 and is the answer not in the manual?
Questions and answers