12/24 Hour Time Display Setting; Manual Time Setting; Calendar Setting - La Crosse WS-9215U-IT Instruction Manual

* When the outdoor signal is successfully received by the weather station, this icon will be switched on.
(If not successful, the icon will not be shown in LCD) So user can easily see whether the last reception
was successful (icon on) or not (icon off).
MANUAL SETTINGS:
The following manual settings are set in the setting mode:

12/24 hour time display setting

Time setting
Calendar (year, month and day)
ºF/ºC temperature unit setting
Press and hold the SET key for about 3 seconds to advance to the setting mode:
12/24 HOUR TIME DISPLAY SETTING
To set the time format in 12h or 24h display:
1. "12h" or "24h" will flash. (default 12h)
2. Press the + key to select the "12h" or "24h" display mode.
3. Confirm with the SET key and enter the "Manual time setting".

MANUAL TIME SETTING

Hour (flashing)
1. The hour digit will flash. Use the + key to set the hour.
2. Press the SET key to enter the minutes setting.
3. The minutes digits will flash. Use the + key to set the minutes.
4. Press the SET key again to confirm and enter the Calendar setting.

CALENDAR SETTING

The weather station can display year, month and day in setting mode only:
1. The year will flash.
2. Use the + key to set the year (between year 2011-2039). Default setting: 2011.
3. Press the SET key again to confirm and to enter the month setting. The month will flash.
4. Use the + key to set the month.
5. Press the SET key again to confirm and to enter the date setting mode. The date will flash.
6. Use the + key to set the date.
7. Confirm all calendar settings with the SET key and enter the "ºF/ºC temperature unit setting".
Year (flashing)
4
Flashing
Minute
Month.Day. (12h display)
Day. Month (24h display)