ADT Unimode 400 Multi-Net Installation Manual page 16

 6\VWHP 2YHUYLHZ
1-2
Control panel features and options that affect installation include:
• Four Notification Appliance Circuit (NAC) bell circuits standard, expandable to 68
total (Class A or B).
• EIA-485 connections for wiring ACS annunciators (including ADT-LDM custom
graphic annunciators).
• Optional modules include: 4XTM transmitter, UDACT Universal Digital Alarm
Communicator/Transmitter, ADT-ACM-8R remote relay module to increase point
capacity, and audio and voice components.
• Autoprogram feature for faster programming of new devices.
• Optional ADT-LCD-80 allows monitoring and controlling the system—up to 6,000
feet from the control panel.
The control panel provides 6.0 amps of usable output power (standard).
System expansion must comply with:
1. The physical limitations of the cabinet configuration.
2. The electrical limitations of the system power supply, including auxiliary power
supplies used for notification appliances.
3. The capacity of the Secondary Power Source (standby batteries).
Refer to System Components, for descriptions of the various optional modules. Refer
to Section 2, Installation for installation information.
Introduction
Unimode 400 Installation PN 50710:A 10/22/97