Internet Security Settings - Quasar CP-3211 User And Installation Manual

Quasar CP-3211/CP-4221 User and Installation Guide
A.3. Internet Security Settings
If ActiveX control installation is blocked, either set Internet security level to default or change
ActiveX controls and plug-in settings.
To set the default Internet security level:
1. Start Internet Explorer.
2. From the Command Bar toolbar, select Tools and select Internet Options from the menu
that appears.
3. In the Internet Options window that appears, select the Security tab.
4. Select in Select a zone to view or change security settings.
5. If the settings are not defined as default, select Default Level and move the Allowed
levels for this zone slider to Medium-high and select OK.
6. Close all browsers and reopen so that the settings take effect.
140
Figure 118: Command Bar Toolbar – Select Internet Options
Figure 119: Internet Options Screen