Figure 14: Corner Box Mounting: Corner Thin/Wide Box + Standard Wall Mount + Mount Kit - Quasar CP-3211 User And Installation Manual

To install the standard/compact wall mount with corner thin/wide box mount:
1. Cut a cable access hole in the wall.
2. Attach the corner thin/wide box to the wall using the appropriate screws and screw anchors
(not provided).
3. Thread the cables through the corner thin/wide box.
4. Attach the standard/compact wall mount to the corner thin/wide box using the supplied
screws and washers.
5. Thread the cables through the standard/compact wall mount with the cables coming out of
the pendant mount's outlet. For outdoor cameras, attach the waterproof gasket to the
pendant mount.
6. After threading the cables, block the entry hole with the supplied sponge to prevent insects
from entering. See
7. Thread the cables through the indoor or outdoor mount kit and attach the mount kit to the
standard/compact wall mount using the supplied screws and washers.
8. For outdoor cameras, adjust the waterproof gasket to the joint.
9. Connect the cables to the camera.
10. Secure the camera to the indoor or outdoor mount kit.
11. Ensure the camera is fixed completely, and that the thread holes on the camera's fixing plate
and the mount kit are aligned.
12. Screw in the supplied screw and washer.

Figure 14: Corner Box Mounting: Corner Thin/Wide Box + Standard Wall Mount + Mount Kit

Standard or Compact Wall Mount, Step 3.
Installation
31