Figure 45: Direct Access To Camera With Upnp Enabled - Quasar CP-3211 User And Installation Manual

Quasar CP-3211/CP-4221 User and Installation Guide
UPnP Settings

Enable UPnP – If UPnP is enabled and a camera is discovered on the LAN, the icon of the
connected camera appears in My Network Places, allowing direct access, as seen below.
Note:
To enable this function, make sure the UPnP component is installed on your
computer. Refer to
procedure.

Enable UPnP port forwarding – When UPnP port forwarding is enabled, the camera is
allowed to open the web server port on the router automatically.
Note:
To enable this function, make sure that your router supports UPnP and that it is
activated.

Friendly name – Set the name for the camera for identification.
Click Save to save the settings.
64

Figure 45: Direct Access to Camera with UPnP Enabled

Install UPnP Components for the Windows 7 and Windows 8