Schedule - Quasar CP-3211 User And Installation Manual

Activating microSD/SDHC card recording
Two types of schedule mode are available: Always and Time Frame setting. You can setup the time
frame to fit the recording schedule by selecting the day(s), start time and duration for recording.
Choosing Always activates the microSD/SDHC card recording all the time. Click Save to confirm the
schedule mode.
Terminating microSD/SDHC card recording
Select Disable to terminate the recording function.
Note:
This option works only if the microSD/SDHC card is installed in the camera.

7.3.13 Schedule

The Schedule screen is used by the network failure detection, tampering and motion detection
functions. To access the schedule function, open the Main window, select the System tab, and click
on the Schedule tab. The functions in this tab allow administrators to create customized schedules
for the camera using this option. If a schedule exists, the administrator can apply that schedule to
this camera using the available dropdown. See figure below.
Note:
This application is not the same as the Recording Schedule function.
To create a new schedule or edit an existing schedule:
1. Click on the appropriate checkboxes relating to the days of the week (Sun, Mon, Tue, Wed,
Thu, Fri and Sat) to create a schedule. Tuesday (Tue) is checked in the example.
2. Set Start time (for example, 09:00) and Duration (for example, 4:00 hours).
3. Click Save to apply the newly created schedule to the camera.
Figure 71: Schedule Screen
Configuration and Operation
85