Table of Contents
Advertisement
To view the camera in full screen:
1. Move the cursor onto the Live View pane.
2. Right-click and select Full screen.
3. Double-click to exit Full screen mode.
To stop running a Sequence line:
Move the cursor to the Live View pane and move the camera in any direction.
7.5.5 Home
The Home Function page under the PTZ tab allows you to specify an operation mode to be activated
automatically when the camera is idle for a specified period of time.
Switch
Select Switch: On or Switch: Off to activate or disable the Home function. Click Set to save the
setting.
Time
Specify the time the camera is idle before executing the Home function action. The time period
ranges from 1 to 128 minutes.
Type
Specify the type of action to be performed as the Home function: Preset, Sequence, Auto pan, or
Pattern.
Figure 99: Home Function Screen
Configuration and Operation
113
Advertisement
Table of Contents
