Security; Figure 29: System Configuration - Security Screen - Quasar CP-3211 User And Installation Manual

Quasar CP-3211/CP-4221 User and Installation Guide
Time Zone
Select the time zone from the drop-down menu.
Enable Daylight Saving Time
To enable DST, check the box and then specify time offset and DST duration. The format for time
offset is [hh:mm:ss]. For example, if the amount of time offset is one hour, enter 01:00:00 in the
field.
Time (Date) Format
Enables a choice of formats: either year, month and day (yyyy/mm/dd) or day, month and year
(dd/mm/yyyy).
Sync with Computer Time
Select this button to synchronize video date and time display with the PC.
Manual
The Administrator can set video date, time and day manually. Entry format should be identical with
that shown next to the Enter field.
Sync with NTP Server
Network Time Protocol (NTP) is an alternate way to synchronize the camera's clock with an NTP
server. Specify the server to synchronize in the Enter field. Then select an update interval from the
drop-down menu. For further information about NTP, visit www.ntp.org.

7.3.2 Security

Clicking the Security tab in the System screen opens a drop-down menu with the tabs: User, HTTPS,
IP Filter and IEE 802.1X.
Figure 29: System Configuration – Security Screen
Related Links
   
User HTTPS IP Filter IEEE 802.1X
50