Figure 87: View-1 (Source) - Quasar CP-3211 User And Installation Manual

Suppose the displayed image of the camera is shown as follows.
To rotate the image vertically, for example, select Flip video. The displayed image is reversed as
shown on the next page.
Following are descriptions of different video rotate types.

Normal video – The image appears as it is viewed.

Flip video – The image is reversed along its horizontal axis.

Mirror video – The image is reversed along its vertical axis.

90 degree clockwise – The image rotates 90° clockwise (to the right).

180 degree rotate – The image rotates 180° counter-clockwise (to the left).

90 degree counterclockwise – The image rotates 90° counter-clockwise (to the left).
Click Save to confirm the setting.
GOV Settings
You can set the GOV length to determine the frame structure (I-frames and P-frames) in a video
stream for saving bandwidth. The setting range is from 2 to 64. A longer GOV means decreasing the
frequency of I-frames. Click Save to confirm the GOV setting.

Figure 87: View-1 (Source)

Figure 88: View-2 Image Rotated Vertically (Reversed)
Configuration and Operation
101