Table of Contents
Advertisement
Cassette/Cassette Carriage Movement
Basic Operation
The cassette is mounted on the cassette carriage via the cassette stand.
• Back-and-forth movement of the cassette (cassette carriage):
This is effected by the vertical motor [A] via the timing belt [B]. The range of movement is controlled
by the Cassette Carriage HP Sensor (front [C], rear [D]).
• Cassette (cassette carriage) height adjustment:
This is effected the by the lift motor [A] in the cassette carriage.
The range of vertical movement is controlled by the Lift Tray HP Sensor [B]. (The maximum range of
vertical movement between the highest and lowest positions is 21 mm.)
Cassette/Cassette Carriage Movement
283
Advertisement
Table of Contents
