Ntp Server Address - Konica Minolta bizhub C450 Network Scanner Operations

3

NTP server address

The IP address of the NTP server can be specified.
1
In the Time Adjustment Setting, touch [Host Address].
The Host Address screen appears.
2
Touch [IP Address Input] or [Host Name Input].
– To specify the host address with the IP address, touch [IP Address
Input].
– To specify the host address with the host name, touch [Host Name
Input].
3
Enter the host address (IP address (1.0.0.0 to 126.255.255.255 or
128.0.0.0 to 223.255.255.255) or host name (up to 255 characters)).
– To edit the values that you entered with "IP Address Input", touch
[
and enter the new value.
– To clear all values, press the [C] (clear) key.
– If the host address exceeds 81 characters, touch [Details] to display
the Host Address Detail screen with the rest of the host addresses.
4
Touch [OK].
The NTP server address is set.
3-94
] or [ ] to move the cursor to the desired area, touch [Delete],
Specifying settings from the control panel
C450