Line Settings - Konica Minolta bizhub C203 Operation Manual

User mode settings
– If the "Confirm Address (Register)" is specified, after touching [OK], a screen appears prompting you
to enter the fax number again. Enter the fax number, and then touch [OK].
!
Detail
For details on the Confirm Address function, refer to "Function ON/OFF Settings - Confirm Address (TX)
(G3)" on page 10-32.

Line Settings

% Specify transmission settings for the line.
Item
Overseas TX
ECM OFF
V. 34 OFF
bizhub C353/C253/C203 (FE2)
Description
Specifies a slow transmission speed to send a Fax to an area in bad commu-
nication.
Cancels ECM mode and cuts communication time to send data.
The ECM mode is an error request repeat method communication defined by
ITU-T (International Telecommunication Union). As faxes equipped with the
ECM mode communicate by checking if the sent data has an error, they can
prevent image blurring by the noise on the phone line.
V. 34 is a communication mode used for Fax communication of super G3.
There are cases when the communication is not possible in super G3 mode
depending on the telephone line conditions when the recipient's machine or
this machine is connected to the line via a private branch exchange.
It is recommended that you set V. 34 to off before sending a Fax. This ma-
chine automatically returns to V. 34 mode when it completes transmission.
9
9-15