Application - Tx Stamp (G3/Ip/I-Fax); Tx Stamp; Printing A Tx Stamp; Document Name (E-Mail/User Box/Smb/Ftp/Webdav/I-Fax) - Konica Minolta bizhub C203 Operation Manual

5
5.5.17

Application - TX Stamp (G3/IP/I-FAX)

TX Stamp

When sending a document using the ADF, a TX Stamp can be printed on the original after it is scanned to
enable page-by-page checking that scanning has succeeded. When sending a double-sided original, a TX
stamp is only printed on the front page.
When [TX Stamp] is enabled, a stamp with a diameter of 4 mm is printed in pink at the position shown in the
figure.
To enable printing a stamp, the optional stamp unit is required.
The stamp ink is a consumable item. If the stamp color becomes faint, contact your service representative.
When the original is mixed, the stamp position may be displaced from the point shown in the figure.
To check that the original is successfully transmitted, refer to the transmission report or the transmission
result that appears on the setting confirmation screen.
!
Detail
When the quick memory transmission function is selected, that function is canceled after selecting [TX
Stamp].

Printing a TX stamp

% Select [TX Stamp] on the Application screen.
5.5.18

Document Name (E-Mail/User Box/SMB/FTP/WebDAV/I-FAX)

% Enter the document name from the touch panel.
5-70
Front surface of original
Original transmitting
direction
Transmitting data
Stamp position
bizhub C353/C253/C203 (FE2)