User mode settings
Host Address
%
Enter the host address for the destination server in the format of a host name, IPv4 address or IPv6
address.
–
For a host name, enter 63 characters or less.
!
Detail
When the input format is switched to the IP address input mode after the host name was entered, the
host name is cleared.
Touching [Input Host Name] after entering the IP address holds the input IP address and displays it in
the character input screen.
Before entering a host name, check that the DNS setting is correctly specified. For details, refer to the
User manual – Network Administrator.
File Path
%
Enter the path to the saved file using up to 96 characters from the touch panel.
User ID
%
Enter the user ID for logging on to the destination computer using up to 47 characters from the touch
panel.
Password
%
Enter the password for logging on to the destination computer using up to 31 characters from the touch
panel.
anonymous
%
To specify no user ID for logging on to the host name, touch [ON].
PASV
%
Select whether to use the PASV mode.
Proxy
%
Select whether to use a proxy server.
Port Number
%
Enter the port number. (Range: 1 to 65535)
bizhub C353/C253/C203 (FE2)
9
9-23